Le T1000-4 est un puissant amplificateur capable d'alimenter 2 haut-parleurs stéréo de 2 Ohm en mode mono bridgé sous 4 Ohm. Ce puissant amplificateur de Rockford Fosgate vous plaira par sa flexibilité et le son qu'il permettra d'obtenir via votre subwoofer ou vos haut-parleurs.

Poids : n/a kg
Dimensions (H x L x L) : 5.44 x 20.68 x 55.66 (cm)

• 1/0 AWG power/ground connectors
• 2/4 channel switch
• 24dB/octave crossover
• Audiophile grade speaker connections
• LED signal meters - monitors signal with simulated VU needle
• MOSFET output stage
• MOSFET power supply
• RCA pass-thru

CaractéristiquesNumber of Channels 4

• Rated Power (continuous power):
• 150 Watts RMS x 4 @ 4-Ohms
• 250 Watts RMS x 4 @ 2-Ohms
• 500 Watts RMS x 2 @ 4-Ohms bridged/mono
• STABLE @ 2-Ohms x 2 bridged/mono (reduced thermal time may occur)
• Total Power (total sum of 'rated power'): 1000 Watts
• Dynamic Power (powercube measurement)
• Front Channels:
• 222 Watts x 2 @ 4-Ohms 0° Res
• 390 Watts x 2 @ 2-Ohms 0° Res
• Rear Channels:
• 223 Watts x 2 @ 4-Ohms 0° Res
• 387 Watts x 2 @ 2-Ohms 0° Res
• Bridgeable
• Efficiency (average)
• 70% @ 4-Ohm
• 65% @ 2-Ohm
• Crossover Controls
• Front Channels:
  
• High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
• Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
• Rear Channels:
• High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
• Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
• Tone Controls
• Front Channels:
• Treble: 0dB to +12dB @ 12kHz
• Bass: 0dB to +18dB @ 45Hz
• Rear Channels:
• Treble: 0dB to +12dB @ 12kHz
• Bass: 0dB to +18dB @ 45Hz
• Function depends upon crossover setting (LP/AP/HP)
• Signal Input
• Front Channels: 1 RCA pair
• Rear Channels: 1 RCA pair
• Signal Output: 1 RCA pair
• Power Input Connector: Block
• Power Wire Gauge: 1/0 AWG
• Speaker Output Connector: Block
• Speaker Wire Gauge: 8 AWG to 16 AWG
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional Remote PEQ (overrides rear channel built-in Punch EQ)
• Visual Indicators:
• Power (Blue LED)
• Thermal (Red LED)
• Protect (Yellow LED)
• Front Output -00dB to +2dB @ 11 steps (Blue LEDs)
• Rear Output -00dB to +2dB @ 11 steps (Blue LEDs)
• Circuit Topology Class: Class A/B
• Frequency Response: 20Hz to 20kHz +/-1dB