L'amplificateur T600-4 vous offre l'equilibre entre puissance et design compact requis pour les hautes performances de systemes audios. La configuration 4 canaux permet d'ajuster au plus fin entre les haut-parleurs avant et arriere. Le filtre integre permet aux canaux arrieres d'etre configures pour faire fonctionner un ou deux subwoofers. 

Poids : 5.44 kg
Dimensions (H x L x L) :  5.42 x 20.68 x 37.86 cm

-2/4 channel switch
-24dB/octave crossover
-4 Gauge power/ground terminals
-Audiophile grade speaker connections
-MOSFET output stage
-MOSFET power supply
-RCA pass-thru

Specificites :

Number of Channels: 4
Rated Power (continuous power): 100W x 4 @ 4-Ohms RMS / 150W x 4 @ 2-Ohms RMS / 300W x 2 @ 4-Ohms bridged RMS / 2-Ohms x 2 bridged Stable
Total Power (total sum of 'rated power'): 600 Watts
Dynamic Power (powercube measurement): 139 Watts x 2 @ 4-Ohms 0degrees Res FRONT / 140 Watts x 2 @ 4-Ohms 0degrees Res REAR / 236 Watts x 2 @ 2-Ohms 0degrees Res FRONT / 236 Watts x 2 @ 2-Ohms 0degrees Res REAR
Bridgeable: Yes
Efficiency (average): 70% @ 4-Ohm / 64% @ 2-Ohm
Crossover Controls: Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth / Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth / Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth / Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Tone Controls: Front Punch EQ: Treble: 0dB to +12dB @ 12kHz / Bass: 0dB to +18dB @ 45Hz / Rear Punch EQ: Treble: 0dB to +12dB @ 12kHz / Bass: 0dB to +18dB @ 45Hz
Signal Input: Front Low level: 1 RCA pair / Rear Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls:  Optional Remote Punch EQ (overrides rear channel built-in Punch EQ)
Visual Indicators: Power / Thermal / Protect
Circuit Topology Class: Class A/B
Frequency Response:  20Hz to 20kHz +/- 1dB